Tagungsband und Präsentationen

  Urheberrecht: © ifas  

Download für Teilnehmer

Der vollständige Konferenzband und die Präsentationen sind unter dem folgenden Link abrufbar:

Download der IFK proceedings und präsentationen

Der Downloadlink ist passwortgeschützt und steht den Teilnehmern des 13. IFK zur Verfügung. Falls Sie Teilnehmer waren und das Passwort benötigen, melden Sie sich bitte beim nebenstehenden Ansprechpartner.

 

Veröffentlichung der Paper

Einiger der Konferenzbeiträge wurden über Open-Access, das International Journal of Fluid Power oder ein Speical Issue der Chemical Engineering & Technology vom Wiley Verlag veröffentlicht. In den nachfolgenden Listen können Sie dies entsprechend entnehmen.

 

Open Access Publikationen

Die Konferenzbeiträge, welche als Open-Acess veröffentlicht wurden, sind unter dem folgenden Link abrufbar:

Download Open Access

Die Open Access Veröffentlichungen umfassen die folgenden Beiträge:

A - TRIBOLOGY

• Lars Brinkmann Tribological analysis of the plain bearings in an external gear pump considering separate bearing bushings
• Svenja Horn Tribo-optimized lubricating interfaces in hydrostatic pumps with surface shaped slippers

B - ELECTRIFICATION

• Shaoyang Qu Design and Verification of An Open-Circuit Electro-Hydraulic Actuator System with An
• Shaole Cai Research on Power Uninterrupted Shift Strategy of Electric Loader Based on Coordinated Control of Drive Electric Motor and Wet Clutch

C - SPECIAL APPLICATIONS

• Eva Holl Compact upper limb exoskeleton with a hydraulically actuated elbow join
• Thomas Farsakoglou Review of offshore winch drive topologies and control methods
• Rituraj Rituraj Investigation of an optimal design and control of digital hydraulic drive for knee exoskeleton

D - MOBILE APPLICATIONS

• Denis Ritz On the qualification of common off-road hydraulic systems for upcoming automation
• Xiaofan Guo Multi-Pressure Rail System Design with Variable Pressure Control Strategy
• Sebastian Deuster Methods of Environmental Information Acquisition by Sensor Data and Digital Twins
• Eric Fischer Data analysis for the evaluation and design of a model-based fault detection based on an independent metering system for mobile hydraulic drives

E - EHA

• Amos Merkel Identification of wear progression due to variating operation modes of small high dynamic piston pumps used in frontline flight control application
• Tobias Schulze Plastic components for electro-hydrostatic drives

F - SYSTEMS I

• Peter F. Pelz Sustainable Systems Design – The New Engineering Design Paradigm
• Željko Šitum Hydraulic Actuator Control Using Cartridge Valves
• Denis Jankovič The Concept of Multi-Agent Smart Hydraulic press
• Christa Düsing Integration of a Safety Function-FMEA into a Professional FMEA-Software Tool to meet the New Draft of ISO 13849

G - MANUFACTURING

• Jaroslav Dvořáček Additive manufacturing of springs for linear motors of High dynamics response Proportional directional valve
• Robin Mommers High Volume Production of Pistons and Cups for Floating Cup Pumps and Motors

I - SYSTEMS II

• Abid Abdul Azeez Multi-physics Co-simulation of an Electric Reach Truck
• Simon Köhler Integration of fault detection and diagnosis methods into OPC UA for mobile machinery
• Ambra Fioravanti Gas sensors for monitoring hydraulic fluid conditions
• Yu Yao Automatic walking method of construction machinery for special operating scenarios

J - DIGITIZATION

• Faras Brumand-Poor Control of a Hydromechanical Pendulum with a Reinforcement Learning Agent
• Philipp Wetterich Towards decentral Condition Monitoring based on Small Data and hybrid Soft Sensors
• Minxing Liu Estimation and Evaluation of Energy Optimization Potential with Machine Learning Method for Active Hydrostatic Lubrication Control at Cradle Bearing in Axial Piston Pump
• Jing Yao Data-driven Fault Diagnosis Based on Deep Learning for Multiple Failures of High Speed On/off Valve

K - COMPONENTS

• Manuel Rexer Transient heat transfer in reciprocating devices – physical model and model validation
• Keith Pate Study of Variable Cam Profiles in Mechanically Actuated Digital Fluid Power Systems
• Nicola Casari A novel method for the numerical investigation of pendulum slider pumps

L - FLUIDS

• Harry Mehler Time- and space-resolved simulation of the air content in hydraulic systems

I - MOBILE HYDRAULICS

• Salih Tetik Secondary Control Based Hydraulic Architectures For Mobile Applications
• Steffen Antoni Hydropneumatic Spray Boom Control - Rethinking Technology
• Paul Marshall Application of a Digital Displacement combined Propel & Work Function Transmission to Off-Highway Machines – Case Study on 4.5t Forklift

II - CYLINDER CONTROL

• John Hutcheson Motion Control of a Hydraulic Cylinder with a Digital Displacement Pump Motor
• Kristof Schlemmer Extending the Boundaries of Electrohydrostatic Actuation

III - FLUIDS & FUELS

• Katy Gibson An Integrated Approach to Achieve Sustainability Goals with Biodegradable Hydraulic Fluids
• Enrico Pasquini Hydrogen as Fuel – Storage System Simulation in Ultra-Heavy-Duty Applications
• Peter Kloft Gas compression units for gases of high purity

IV - DIGITAL INDUSTRIES

• Faried Makansi Feature Generation and Evaluation for Data-Based Condition Monitoring of a Hydraulic Press
• Tapio Torikka Development and Operation of a Machine Learning based Predictive Maintenance System in the Real World
• Kevin T. Logan Data Management as an Enabler of Sustainability – Discussion Using the Example of a Digital Data Sheet

V - DESIGN OF MOBILE SYSTEMS

• Henrique Raduenz Rule- and Neural Network-based Energy Management for a Hydraulic Hybrid Wheel Loader
• David Fassbender Using Displacement Control for Single Cylinders on an Electric Mobile Machine - Improved Efficiency Versus Increased Component Costs
• Andreas Opgenoorth Switching procedures of multi-pressure systems for electrified excavators

VI - SIMULATION

• Zoufiné Lauer-Baré Analytical formulae in fluid power, quo vadis in times of CFD and I4.0?
• Stephan Weber Fast 1D Solution of Hydraulic Systems with Fully Coupled Thermo-Hydro-Mechanical Interactions
• Benedikt Müller Model-Based Engineering of an Arial Working Platform with Trajectory Control

VII - PUMPS & DATA

• Abid Abdul Azeez AI-based condition monitoring of a variable displacement axial piston pump

VIII - PNEUMATICS I

• Wolfgang Gauchel On the thermodynamics of pneumatic compression and expansion
• Fedor Nazarov Sensitivity Analysis and Robust Optimization of an Integrated Pneumatic End-Position Cushioning

IX - PUMPS

• Peter Achten Measuring the effect of shuttles on the overall efficiency of a slipper type axial piston pump
• Jérémie Lagarde Danfoss Digital Displacement & Editron: An efficient electro-hydraulic system for mobile applications

XI - PNEUMATICS II

• Stephan Merkelbach Closed Loop Pneumatic Levelling Control for CV Driver Seats

XII - MOBILE SYSTEMS & I 4.0

• Tobias Lange Development and Design Considerations of Next Generation Electric and Hybrid Dozers
• Christian Haas Environment Detection and Trajectory Planning Concept for an Automated Excavator using Open Source Software

XIII - VALVE ACTUATION

• Michael Erhard The path to distributed hydraulic actuation - Model-based system design of enhanced mechatronic pilot systems
• Amadeu Placido Neto Development and Qualification of a New Rotary Subsea Valve Actuator for Small Bore Process Valves using Continuous Integration Approach

XIV - MICROFLUIDICS

• Annabell Effner Experimental Investigation on a peristaltic Micropump based on Magnetic Shape Memory Alloy
• Titus van den Brink Micro hydraulic pumps for battery powered portable rescue tools and more

 

International Journal of Fluid Power

• Rituraj, Rudolf Scheidl Multi-objective Design Optimization and Control Strategy for Digital Hydraulically Driven Knee Exoskeleton
• Umberto Stuppioni, Nicola Casari, Federico Monterosso, Alessandro Blum, Davide Gambetti, Michele Pinelli, Alessio Suman A Novel Method for the Numerical Investigation of Pendulum Slider Pumps
• Shaoyang Qu, Federico Zappaterra, Andrea Vacca, Zifan Liu, Enrique Busquets Experimental Verification of An Electro-Hydraulic Actuation System Driven by An Integrated Electro-Hydraulic Unit
• Gianluca Ganassi, Davide Mesturini, Cesare Dolcin, Antonella Bonavolontà, Emma Frosina, Pietro Marani Viable Energy Recovery Strategies Through Advanced Directional Control Valve
• Faras Brumand-Poor, Lovis Kauderer, Gunnar Matthiesen, Katharina Schmitz Application of Deep Reinforcement Learning Control of an Inverted Hydraulic Pendulum

 

Chemical Engineering and Technology

• Ahmed Shorbagy, Roman Ivantysyn, Jürgen Weber Holistic Analysis of the Tribological Interfaces of an Axial Piston Pump – Focusing on the Pump Efficiency

• Darko Lovrec, Roland Kalb, Vito Tič Application Areas of Ionic Hydraulic Fluids

• Gabriel De Carvalho, Eric Bideaux, Paolo Massioni, Sylvie Sesmat, Frederic Bristiel Pneumatic Pressure Control Using on-off Valves with Pulse Width Modulation

• Martin Wittmaack, Markus André, Katharina Schmitz Dynamic Friction Model for the Investigation of Stick-Slip Oscillations

• Fabian Guse, Maximilian Voshage, Johannes H. Schleifenbaum, Katharina Schmitz Cavitation Erosion Resistance of Additively Manufactured Materials

• Lukas Michiels, Marcus Geimer Influence of High Pressure Drop Rates on Fatigue Crack Growth

• Susanne Hahn, Simon Feldmeth, Frank Bauer Assessment of the Lubricity of Grease-Sealing Rotary Shaft Seals Based on Grease Properties

• Philipp Fricker, Matthias Baumann, Frank Bauer How Wetting Properties Influence the Wear of Radial Lip Sealing Systems

• Valentin Stegmaier, Walter Schaaf, Nasser Jazdi, Michael Weyrich Simulation Model for Digital Twins of Pneumatic Vacuum Ejectors

• Oluwaseyi Ogunsola, Jazil Bin Shahid, Paul Michael Effects of Fluid Properties on Rod Seal Stick-Slip Mechanical and Sound Vibrations

• Oliver Feuchtmüller, Lothar Hörl, Frank Bauer An Empirical Study on the Wear of Reciprocating Hydraulic Rod Seals Using 15 Different Oils

• Seyedmajid Mehrnia, Peter F. Pelz Tribological Design by Molecular Dynamics Simulation: Influence of the Molecular Structure on Wall Slip and Bulk Shear

• Felix Fischer, Dariush Bady, Dr.-Ing. Katharina Schmitz Leakage of Metallic Ball Seat Valves with Anisotropic Surfaces

• Achill Holzer, Stephan Koss, Prof. Dr.-Ing. Johannes Henrich Schleifenbaum, Prof. Dr.-Ing. Katharina Schmitz Extreme High-Speed Laser Material Application-Coated Carbide-Reinforced Control Plates and Conventional Lead-Based Plates in Axial Piston Machines

• Dr. Murat Kapsiz, Stefan Geffroy, Achill Holzer, Prof. Dr.-Ing. Katharina Schmitz Tribological Performances of Diamond-Like Carbon Coatings for Hydraulic Applications

• Dinghao Pan, Prof. Andrea Vacca Modeling of Crescent-Type Internal Gear Pumps Considering Gear Radial Micromotion

• Christian Reese Jimenez, Dr. Olivier Reinertz, Prof. Dr. Katharina Schmitz Energy Savings through Adaptive Upstream Throttling and Supply Shut-Off on Downstream Throttled Drives

• Sven Osterland, Lennard Günther, Jürgen Weber Experiments and Computational Fluid Dynamics on Vapor and Gas Cavitation for Oil Hydraulics

• Simon Hucko, Gunnar Matthiesen, Dr. Olivier Reinertz, Prof. Dr. Katharina Schmitz Investigation of Magnetic Force Hysteresis in Electromechanical Actuators

• Niklas Bauer, Dr.-Ing. Matthias Baumann, Simon Feldmeth, Prof. Dr.-Ing. Frank Bauer, Prof. Dr.-Ing. Katharina Schmitz Elastohydrodynamic Simulation of Pneumatic Sealing Friction Considering 3D Surface Topography