[Contribution to a conference proceedings]
Effects of an elevated water content on electrostatic charging
In: [ASME - JSME - KSME Joint Fluids Engineering Conference 2019, AJKFluids 2019, 2019-07-28 - 2019-08-01, San Francisco, USA], 2019

Weishaar, Philipp Cedric (Corresponding author)
Mielke, Tobias
Schmitz, Katharina

[Contribution to a conference proceedings]
Development and Use of a Two-phase CFD Solver for Metamodeling of a Hydraulic Reservoir
In: [10th International Conference on Multiphase Flow, ICMF 2019, 2019-05-19 - 2019-05-24, Rio de Janeiro, Brazil], 2019

Mostafavi, Rahelehsadat (Corresponding author)
Schmitz, Katharina

[Book, Dissertation / PhD Thesis]
Evaluation of steady-state flow forces in spool valves
In: Reihe Fluidtechnik. D 94, 2019

Bordovsky, Patrik

[Journal Article]
Trends und Highlights der Hannover Messe 2019
In: O + P : Fluidtechnik für den Maschinen- und Anlagenbau, 6, 18-21, 2019

Aengenheister, Stefan
Deuster, Sebastian
Duensing, Yannick
Guse, Fabian
Rambaks, Andris
et al.

[Contribution to a conference proceedings]
Methods for Determination of the Gap Height in water-lubricated Contacts
In: [16th Scandinavian International Conference on Fluid Power, SICFP 2019, 2019-05-22 - 2019-05-24, Tampere, Finland], 2019

Schoemacker, Florian (Corresponding author)
Schmitz, Katharina

[Abstract, Contribution to a book, Contribution to a conference proceedings]
Optimization of a disc-disc tribometer to avoid hysteresis during friction measurements
In: ECOTRIB 2019 : 7th European Conference on Tribology with special event 4th Austria-India-Symposium on Materials Engineering and Tribology, MaTri'19 : book of abstracts / Editors: N. Dörr ; C. Gachot ; F. Franek ; M. Kalin ; E. Ciolli ; R. Crockett, 2019

Holzer, Achill (Corresponding author)
Schmitz, Katharina

[Journal Article]
Hot-Gas-Bulgetest, ein neues Verfahren zur Materialprüfung für das Presshärten von Stahl
In: Stahl und Eisen, 139 (6), 26-29, 2019

Braun, Alexander (Corresponding author)
Hirt, Gerhard
Matthiesen, Gunnar

[Contribution to a conference proceedings]
Carbon Footprint Determination of an electro-hydraulic compact axle (EHA) based on DIN EN ISO 14067
In: [The Sixteenth Scandinavian International Conference on Fluid Power, SICFP19, 2019-05-22 - 2019-05-24, Tampere, Finland], 2019

Waerder, Maximilian (Corresponding author)
Merkelbach, Stephan
Schmitz, Katharina

[Contribution to a conference proceedings]
Experimental investigation of the hard-hard contact in seat valves
In: [16th Scandinavian International Conference on Fluid Power, SICFP19, 2019-05-22 - 2019-05-24, Tampere, Finland], 2019

Mielke, Tobias (Corresponding author)
Schmitz, Katharina
Ayala Galindo, Ximena
Rückert, Marcel

[Contribution to a conference proceedings]
On the Saturation Dynamics of the Oil Film on a Hydraulic Cylinder Rod during Extension
In: [16th Scandinavian International Conference on Fluid Power, SICFP19, 2019-05-22 - 2019-05-24, Tampere, Finland], 2019

Mielke, Tobias (Corresponding author)
Schmitz, Katharina

[Contribution to a conference proceedings]
Analytical approach to calculate the rotational angle-dependent compensation ratio of the cylinder block - valve plate contact in axial piston machines
In: [16th Scandinavian International Conference on Fluid Power, SICFP19, 2019-05-22 - 2019-05-24, Tampere, Finland], 2019

Lee, Seong-Ryeol (Corresponding author)
Wegner, Stephan
Murrenhoff, Hubertus
Schmitz, Katharina

[Contribution to a conference proceedings]
Hydro-Mechanical Pressure Control Concepts for Digital Displacement Pumps
In: [The 10th Workshop on Digital Fluid Power, DFP19, 2019-02-28 - 2019-03-01, Linz, Austria], 2019

Reinertz, Olivier (Corresponding author)
Schmitz, Katharina

[Contribution to a book, Contribution to a conference proceedings]
Bauraumreduktion durch Drehzahlanhebung - Einsatz von High-Speed-Antrieben in elektrohydraulischen Linearaktuatoren für mobile Anwendungen
In: Hybride und energieeffiziente Antriebe für mobile Arbeitsmaschinen ; 7. Fachtagung 20. Februar 2019, Karlsruhe / Herausgegeben von WVMA e.V. - Wissenschaftlicher Verein für Mobile Arbeitsmaschinen, Karlsruhe, 73-93, 2019
[DOI: 10.18154/RWTH-2019-05269]

Roth, David Johannes
Jacobs, Georg
Kramer, Achim
Krech, Max
Pietrzyk, Tobias (Corresponding author)
et al.

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung und Auslegung einer elektro-hydraulischen Achse mit einem 48 V High-Speed-Antrieb zur Dezentralisierung der Arbeitshydraulik eines Kompaktbaggers
In: Hybride und energieeffiziente Antriebe für mobile Arbeitsmaschinen ; 7. Fachtagung 20. Februar 2019, Karlsruhe / Herausgegeben von WVMA e.V. - Wissenschaftlicher Verein für Mobile Arbeitsmaschinen, Karlsruhe, 55-71, 2019
[DOI: 10.18154/RWTH-2019-05268]

Pietrzyk, Tobias (Corresponding author)
Schmitz, Katharina
Lee, Seong-Ryeol
Roth, David Johannes
Jacobs, Georg

[Journal Article]
Dezentrale kompakte Hydraulikversorgung durch High Speed-Komponenten
In: ATZheavy duty, 12 (1), 68-73, 2019
[DOI: 10.1007/s35746-019-0007-9]

Roth, David Johannes (Corresponding author)
Jacobs, Georg
Pietrzyk, Tobias
Schmitz, Katharina

[Contribution to a book, Contribution to a conference proceedings]
A Novel Exergy Efficient Pneumatic Vacuum Pump
In: Proceedings : The Sixteenth Scandinavian International Conference on Fluid Power, SICFP19 May 22 - 24, 2019 Tampere, Finland / Tampereen yliopisto - Tampere University ; Editors: Kalevi Huhtala, Seppo Tikkanen, Janne Uusi-Heikkilä, 178-189, 2019

Reinertz, Olivier (Corresponding author)
Schmitz, Katharina

[Master Thesis, Report]
Entwicklung eines Druckboosters auf Basis eines Abgasturboladers, 2019

Duensig, Yannick (Corresponding author)

[Master Thesis, Report]
Evaluierung neuer fachdisziplinübergreifender Simulationsmethodiken zur Ansteuerung der Bremsaktuatorik, 2019

Stankovic, Dordo (Corresponding author)

[Contribution to a conference proceedings]
High-Pressure Capillary Viscometer with Variable Shear-Rate
In: [Fuel Science - From Production to Propulsion - 7th International Conference, FSC Conference 2019, 2019-05-13 - 2019-05-15, Aachen, Germany], 2019

Fischer, Felix Lukas (Corresponding author)
Hofmeister, Marius
Schmitz, Katharina

[Contribution to a conference proceedings, Journal Article]
Interaction Between Swash Plate Movement And Commutation In Axial Piston Machines
In: JFPS International Journal of Fluid Power System, 11 (3), 49-54, 2019
[DOI: 10.5739/jfpsij.11.49]

Schoemacker, Florian (Corresponding author)
Murrenhoff, Hubertus

[Journal Article]
Finite element based transient elastohydrodynamic simulation of translational hydraulic seals
In: International journal of fluid power, 20 (1), 1-26, 2019
[DOI: 10.13052/ijfp1439-9776.2011]

Angerhausen, Julian Benedikt (Corresponding author)
Murrenhoff, Hubertus
Persson, Bo N. J.
Dorogin, Leonid
Scaraggi, Michele

[Journal Article]
Tribological Qualification and Prediction of Fracture Probability of High-Performance Ceramics for Application in Flat Sliding Valves
In: Ceramic applications, 7 (1), 56-62, 2019

Liu, Chao (Corresponding author)
Aengenheister, Stefan
Herzog, Simone
Deng, Yuanbin
Kaletsch, Anke
et al.

[Journal Article]
Entwicklung eines Hochtemperatur-Bulgetests : Verbesserte Materialcharakterisierung für die Warmblechumformung
In: wt Werkstattstechnik online, 2019 (1/2), 100-104, 2019

Braun, Alexander (Corresponding author)
Matthiesen, Gunnar
Hirt, Gerhard

[Book, Dissertation / PhD Thesis]
Impact of biofuel lubricity on wear in highly loaded contacts
In: Reihe Fluidtechnik. D 93, 2019
[DOI: 10.18154/RWTH-2019-03383]

Weinebeck, Alexander

[Journal Article]
Mit Datenanalyse zum Carbon Footprint in der Produktion
In: Digital manufacturing, 2019 (1), 42-43, 2019

Külschbach, Andreas (Corresponding author)
Waerder, Maximilian

[Journal Article]
Simulation and experimental validation of translational hydraulic seal wear
In: Tribology international, 134, 296-307, 2019
[DOI: 10.1016/j.triboint.2019.01.048]

Angerhausen, Julian Benedikt (Corresponding author)
Woyciniuk, Maik
Murrenhoff, Hubertus
Schmitz, Katharina

[Book, Dissertation / PhD Thesis]
Experimentelle Untersuchung nachhaltiger Hydraulikfluide auf Ester- und Wasserbasis
In: Reihe Fluidtechnik 92, 2019

Otto, Nicolai

[Book]
Institute Portfolio : Innovation in Fluid Power, 2018

Schleihs, Christian Wolfgang (Responsible party)
Rückert, Marcel (Redactor)
Schmitz, Katharina (Editor)
Reinertz, Olivier (Editor)
Gärtner, Markus (Editor)
et al.

[Bachelor Thesis]
Erstellung eines rechnergeschützten Auswertetools für die Durchführung einer effizienteren Auswertung hinsichtlich des Klemmverhaltens von hydraulischen Ventilen, 2018

Roggenbuck, Lotte

[Book, Proceedings]
Fluid Power Networks : 11th International Fluid Power Conference (19th - 21th March 2018), 2018

Murrenhoff, Hubertus (Editor)

[Patent]
Fluidarmatur für eine Fluidleitung, 2018

Dießel, Dominic Andreas
Rückert, Marcel
Wiederkehr, Bettina

[Bachelor Thesis]
Konstruktion eines Rotationstribometers zur Bestimmung der elektrostatischen Aufladung von Hydraulikflüssigkeiten, 2018

Görres, Alexander (Corresponding author)

[Master Thesis, Report]
Erarbeitung von innovativen Konzepten für die Adsorptionstrocknung in Druckluftsystemen, 2018

Stelkens, Edima Elisa (Corresponding author)

[Bachelor Thesis, Report]
Entwicklung eines hydraulischen Antriebes eines zweiachsigen Riesenlabyrinthes, 2018

Bähr, Sandro (Corresponding author)

[Bachelor Thesis, Report]
Erstellung eines Fahrermodells für die Verwendung in Baggersimulationen, 2018

Steyer, Martin (Corresponding author)

[Master Thesis]
Entwicklung einer passiven Schienenfahrzeugbremse mit hydraulisch-mechanisch geregeltem Bremsmoment, 2018

Merkel, Philip Amos (Corresponding author)

[Bachelor Thesis, Report]
Vermessung eines Dieselersatzstoffs mit einem Kapillarviskosimeter, 2018

Bartz, Julian (Corresponding author)

[Master Thesis]
Auswirkungen von Parameteränderungen auf die Volumenstrom- und Druckpulsation einer variablen Axialkolbenpumpe mit Cross-Angle in Schrägscheibenbauart, 2018

Rambaks, Andris (Corresponding author)

[Bachelor Thesis, Report]
Development of a simulation model for a novel high-speed pump, 2018

Xi, Yang (Corresponding author)

[Master Thesis]
Konstruktion eines Prüfstandes für innovative Dichtkonzepte wasserhydraulischer Radialkolbenpumpen, 2018

Deuster, Sebastian (Corresponding author)

[Bachelor Thesis, Report]
Entwicklung der Hauptstufe eines hydraulischen Servoventils für den Einsatz von Gasen, 2018

Brenner, Julian Tankred (Corresponding author)

[Report]
Identifikation und Simulation von typischen Lastzyklen für hydraulische und elektromechanische Linearantriebe, 2018

Koebele, Micha (Corresponding author)
Thies, Armin (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Analytical, Experimental and Numerical Methods to Quantify the Pressurization on the Piston Chamber of Axial Piston Machines
In: JFPS International Journal of Fluid Power System, 11 (3), 97-103, 2018
[DOI: 10.5739/jfpsij.11.97]

Gärtner, Markus (Corresponding author)
Kratschun, Filipp
Murrenhoff, Hubertus

[Contribution to a book, Contribution to a conference proceedings]
Design of a semi-physical dynamic model for a pneumatic bulge test using local model networks trained with FEM data
In: 2018 Global Fluid Power Society PhD Symposium (GFPS) : Samara, Russia, July 18-20, 2018 / Global Fluid Power Society, Samara University ; RFBE - Russian Foundation for Basic Research, IEEE, IEEE Region 8, 6 Seiten, 2018
[DOI: 10.1109/GFPS.2018.8472362]

Matthiesen, Gunnar (Corresponding author)
Braun, Alexander (Corresponding author)
Reinertz, Olivier (Corresponding author)
Schmitz, Katharina (Corresponding author)

[Contribution to a conference proceedings]
Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
In: Proceedings of 2018 International Conference on Hydraulics and Pneumatics - HERVEX : November 7-9, Băile Govora, Romania, 12-23, 2018

Matthiesen, Gunnar (Corresponding author)
Merget, Daniel (Corresponding author)
Rückert, Marcel
Schmitz, Katharina
Schleifenbaum, Johannes Henrich

[Journal Article]
Physically motivated lumped-parameter model for proportional magnets
In: International journal of fluid power, 19 (3), 140-151, 2018
[DOI: 10.1080/14399776.2018.1486631]

Reinertz, Olivier (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Investigating Electrostatic Flow Charging Using a Small Scale Test Bench
In: Proceedings of the BATH/ASME Symposium on Fluid Power and Motion Control - 2018 : presented at BATH/ASME 2018 Symposium on Fluid Power and Motion Control, September 12-14, 2018, Bath, United Kingdom / sponsored by the Fluid Power Systems and Technology Division, ASME, V001T01A003, 8 Seiten, 2018
[DOI: 10.1115/FPMC2018-8807]

Weishaar, Philipp Cedric (Corresponding author)
Görres, Alexander
Murrenhoff, Hubertus
Schmitz, Katharina

[Journal Article]
Experimental Evaluation of System Efficiency for a Hydraulic Hybrid Architecture of Excavators
In: MM Science journal, 2018 (3), 2455-2459, 2018
[DOI: 10.17973/MMSJ.2018_10_201836]

Hijikata, Seiji (Corresponding author)
Weishaar, Philipp Cedric (Corresponding author)
Liefeld, Roland
Schmitz, Katharina

[Contribution to a book, Contribution to a conference proceedings]
Water Vapour Cavitation in Hydraulic Fluids
In: Proceedings of the BATH/ASME Symposium on Fluid Power and Motion Control - 2018 : presented at BATH/ASME 2018 Symposium on Fluid Power and Motion Control, September 12-14, 2018, Bath, United Kingdom / sponsored by the Fluid Power Systems and Technology Division, ASME, FPMC2018-8872, V001T01A038, 8 Seiten, 2018
[DOI: 10.1115/FPMC2018-8872]

Kratschun, Filipp (Corresponding author)
Mielke, Tobias
Schmitz, Katharina

[Contribution to a conference proceedings]
On the dissolved water amount in the oil film on a piston rod
In: [International Conference on Hydraulics and Pneumatics, HERVEX, 2018-11-07 - 2018-11-09, Baile Govora, Rumänien], 139-145, 2018

Mielke, Tobias (Corresponding author)
Schmitz, Katharina