11th International Fluid Technology Colloquium Aachen 2018

  Copyright: © ifas

In 2018, the eleventh International Fluid Technology Colloquium was held in Aachen.

 

Preface

WELCOME TO THE 11th IFK!

Fluid Power Networks has drawn a lot of attention and the organizing team and all collaborators at IFAS are proud that you followed our invitation to join the 11th Internatio- nal Conference on Fluid Power in Aachen. Welcome to the academic and truly intercultural city in the heart of Europe!

The traditional IFK is one of the world's largest scientific conferences on fluid power and unites scientists with industrial delegates at an international forum to exchange knowledge in the area of fluid power drives and systems. The first conference (1. AFK, Aachener Fluidtechnisches Kolloquium) was conducted in 1974 by Prof. Wolfgang Backé. Since 1998 the Institute for Fluid Power Drives and Controls (IFAS) at RWTH Aachen University and the Institute of Fluid Power (IFD) at TU Dresden alternately organize the International Fluid Power Conference (IFK) every two years. This year we host 141 scientific contributions and speakers. Attendees from 30 countries are registered. 36 companies exhibit their products in a designated floor area in the Eurogress. A special high- light of the 11th IFK is the 50th anniversary of Fluid Power Research at RWTH Aachen University which will be celebrated on Wednesday, March 21st. It is accompanied by a change in directorship at IFAS. Prof. Katharina Schmitz will be introduced as my successor.

The program starts on Monday morning with a symposium where researchers from mainly universities and other research facilities but also from companies have the opportunity to present their research projects to a wide international community of scientists. In the evening of the first day all participants are invited to the opening event that marks the start of the exhibition.

The second day begins with the opening address of Mr. Christian Kienzle of VDMA followed by two plenary lectures to actual loT subjects as they concern fluid power. On Tuesday there are six groups in two parallel sessions of presentations covering a wide variety of application and technology oriented topics in the time of digitalization. The banquet is held at the Coronation Hall of the Aachen town hall and will be followed by an after show in the Aula Carolina. On Wednesday the program continues in three parallel sessions. The Rector of RWTH, Prof. Schmachtenberg will talk in the conIcluding plenary session, arrange the hand over in the directorship of IFAS and initiate the anniversary events.

A traditional cultural program will be offered in the surrounding of Aachen as well as an excursi- on following the conference on Thursday and Friday.

Finally, we would like to express our thanks to all members of the program and organizing committee, scientific advi sory board, plenary and keynote speakers, speakers, revie- wers, chairmen and exhibitors for their time and commitment helping to conduct another successful conference and we hope that you will enjoy the 11th IFK in Aachen.

Univ.-Prof. Dr.-Ing. H. Murrenhoff

 

Publications

The publications of the ninth IFK can be found in the following list. The proceedings are available at ifas or directly from Verlag Mainz (ISBN: 978-3-95886-215-9).

GROUP A - MOBILE APPLICATIONS

• Nicolas Brötz Integrated Fluid Dynamic Vibration Absorber for Mobile Applications
• Jun.-Prof. Jörg Edler A new Approach on a Hydrostatic Motor for Applications in Mobile Cranes
• Jun.-Prof. Ajit Kumar Performance Investigation of a Hydro-pneumatic type Accumulator used in a Hydrostatic Drive System of Off-road Vehicles
• PhD Min Cheng Active damping improvement of the electrohydraulic control system with dual actuators for mobile machinery

GROUP B - ENERGY MANAGEMENT

• PhD Bin Yu Accurate Control Method of Vane Direction Based on Pressure Difference Feedback in Active Yaw System for Wind Turbines
• Jun.-Prof. Niranjan Kumar Electrical Energy Regeneration of Hydraulic-Split Power Transmission System Using Fuel Efficient Controller
• Linart Shabi Investigation of Potentials of Different Cooling System Structures for Machine Tool
• PhD Chong Liu An energy efficiency evaluation method based on least squares combination weighted in refrigeration system

GROUP C - SYSTEMS

• PhD Tatjana Minav Adaptive Control for direct-driven hydraulic drive
• PhD Alexander Mitov Identification and synthesis of linear-quadratic regulator for digital control of electrohydraulic steering system
• Jan Siebert Marco Wydra Development and Implementation of a Control and Regulation Concept for a Hydraulic Load Unit
• Matti Linjama Fault-Tolerant Control of a Multi-Outlet Digital Hydraulic Pump-Motor
• Qi Zhong Design of control system for independent metering valve

GROUP D - DESIGN PROCESS

• Ryan Jenkins A Semi-Empirical Lumped Parameter Model of a Pressure Compensated Vane Pump
• Tobias Speicher Process-driven component adjustment in variable speed pump drives – development of a strategy to increase the overall energy efficiency
• Artemi Makarow Holistic Approach to the System Optimization of a Proportional Valve
• Andrea Lucchi System optimization by means of an integrated design: the Dana Brevini case.
• Enrico Pasquini Pressure Loss in Unsteady Annular Channel Flow

GROUP E - COMPONENTS

• Florian Schoemacker Piston slippers for robust water hydraulic pumps
• James Marschand Comparison of a Variable Displacement 3-Piston Inline Digital Pump using Electrically and Mechanically Actuated Poppet Valves
• Prof. Robert Castilla Fluid Dynamic Effects of Interteeth and Sideway Clearances on a Mini Gerotor Pump using Dynamic Meshing Decomposition
• Ying Li Experimental study on churning losses reduction for axial piston pumps
• Prof. Bulent Sarlioglu Investigation of the Aerodynamics Characteristics of the Integrated Motor-Compressor

GROUP F - MOBILE APPLICATIONS

• PhD Tatiana Minav Control strategy for a direct driven hydraulics system in the case of a mining loader
• Prof. Andrea Vacca Combining Control and Monitoring in Mobile Machines: the Case of an Hydraulic Crane
• PhD Ruqi Ding Fault-tolerance Operation for Independent Metering Control Valve
• Kerstin Ritters Efficiency studies on double pump supply units
• PhD Lei Ge High Energy Efficiency Driving of the Hydraulic Excavator Boom with an Asymmetric Pump

GROUP G - TRIBOLOGY & FLUIDS

• Tobias Mielke Entrainment of free water into a hydraulic system through the rod sealing
• Joep Nijssen Development of an interface between a plunger and an eccentric running track for a low-speed seawater pump
• Alexander Terwort Bubble nucleation in hydraulic systems
• Lars Brinkschulte An approach to wear simulation of hydrostatic drives to improve the availability of mobile machines
• Yuan Chen Investigation of Laser surface texturing for Integrated PV (pressure×velocity)-value-decreased Retainer in an EHA Pump

GROUP H - PNEUMATICS

• Stephan Merkelbach Development of a rotary pneumatic transformer
• David Straub Experimental and Theoretical Investigation of Lightweight Pumps and Fluid Reservoirs for Electrically Driven Vacuum Systems in Automated Handling Processes
• Annabell Effner Fast Switching Pneumatic Valves Driven by Magnetic Shape Memory Materials
• PhD Miha Pipan Closed-loop control algorithm for fast switching pneumatic valves
• Filipp Kratschun Transient simulation of a pneumatic sharp edged L-shape fitting

GROUP I - NEW & SPECIAL APPLICATIONS

• PhD Vito Tič Low compressibility of ionic liquids and its effects on pulsation within hydraulic system
• Marcel Rückert High Pressure Falling Cylinder Viscometer-Error Analysis and Improvement Proposal
• Nils Preuß Accumulators with sorbent material – an innovative approach towards size and weight reduction
• Andreja Poljšak Polymer composites materials for water hydraulic seat on/off valves
• PhD Niels Diepeveen Field tests of the DOT500 prototype hydraulic wind turbine

GROUP J - TRIBOLOGY & FLUIDS

• Dominik Krahl Burning Hydraulics – Experimental Investigations of the Micro-Diesel Effect and Gas Discharge within Models of a Valve and a Pump
• Paul Michael An Investigation of the Effects of Fluid Composition on Aeration, Efficiency, and Sound Generation in an Axial Piston Pump
• Julian Angerhausen Influence of transient effects on the behaviour of translational hydraulic seals
• Tobias Corneli Reduction of bearing load capacity due to measured wall slip
• Lizhi Shang Advanced Heat transfer model for piston/cylinder interface

GROUP 1 - DIGITALIZATION, CONNECTIVITY & COMMUNICATION

• Raphael Alt A survey of „Industrie 4.0“ in the field of Fluid Power – challenges and opportunities by the example of field device integration
• Tapio Torikka Predictive Maintenance Service Powered by Machine Learning and Big Data
• Oliver Breuer From Big Data to Smart Data
• Prof. Peter F. Pelz Towards digitalization of hydraulic systems using soft sensor networks

GROUP 2 - COMPONENTS

• Galina Haidarschin Benchmarking of potential substituents for leaded bronze in axial sliding bearings for mobile hydraulic applications
• Roman Ivantysyn Investigation of the Thermal Behavior in the Lubricating Gap of an Axial Piston Pump with Respect to Lifetime
• PhD Peter Achten Reducing the wall thickness of the cups and pistons in floating cup pumps and motors
• Anton Gaile Emmanuel Viennet Noise and vibration reduction for an aerospace secondary controlled hydraulic motor

GROUP 3 - INDUSTRIAL APPLICATIONS

• PhD Bastian Beckmann myCro – Downsizing of hydraulic power units by revolutionizing the design
• Marcus Helmke Computer-assisted modeling and automatic controller adjustment based on an innovative non-parametric identification method
• Wilhelm Hagemeister Dynamic High-Torque Test Stand with Hydrostatic Drive
• Ekhard Siemer Electro-Hydrostatic Drive Concept for the Ring Rolling Process

GROUP 4 - MOBILE APPLICATIONS

• PhD Milos Vukovic Systematic Data Analysis for Optimal System Design
• Marani Pietro Experimental Evaluation of the New Meter Out Sensing Architecture
• Lorenzo Serrao Adaptive Park Brake Technology to Improve Stability of Wheeled Excavators
• PhD Martin Inderelst Quantification of Energy Saving Measures in a 21t Excavator Hydraulic System – A Holistic Investigation?

GROUP 5 - ENERGY MANAGEMENT

• Sebastiaan Mulders Control design and validation for the hydraulic DOT500 wind turbine
• Prof. Kim Stelson Characterization and Calibration of a Power Regenerative Hydrostatic Wind Turbine Test Bed using an Advanced Control Valve
• PhD Mirjana Ristic Electrification of hydraulics opens new ways for intelligent energyoptimized systems
• Tobias Pietrzyk Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications

GROUP 6 - COMPONENTS

• Peter Tappe High-dynamic Proportional Solenoid on the basis of Established Production Technologies
• PhD Jörg Schneider Proportional pressure reducing valves with intrinsic fail safe function
• Christian Stauch Proportional Leak-Free Pressure Control Valve
• PhD Roman Weidemann Smart hydraulic cylinder with force measurement system

GROUP PA - COMPONENTS

• Gonzalo A. Barillas Sealing Systems for Hydraulic Cylinders
• Ervin Strmčnik The improvement of the total efficiency of the gerotor orbital hydraulic motor
• Cheng-long Wang An Active-control digital hydraulic damper: Design, modeling and simulation
• PhD Lucian Nāșcuțiu A control approach for fast voice coil actuators for servo valve applications in mobile and industrial hydraulics

GROUP PB - DESIGN PROCESS

• Jiaming Wang The optimization design algorithm of hydraulic components under multiple operating conditions

GROUP PC - INDUSTRIAL APPLICATIONS

• PhD Taher Salah El-Din The Development of an integrated monitoring and filtration system for performance assurance of hydraulic mould oscillation systems used in continuous casting machines at flat steel plants
• PhD Tatiana Minav Experimental Investigation of a Directly Driven Hydraulic Unit in an Industrial Application
• Prof. Lijie Zhang Reliability Evaluation of Hydraulic Pump Based on Performance Degradation

GROUP PD - MOBILE APPLICATIONS

• PhD Tatiana Minav Efficiency Study of an Electro-Hydraulic Excavator

GROUP PE - NEW & SPECIAL APPLICATIONS

• Prof. Željko Šitum Wireless Control of an Electro-hydraulic Robotic Manipulator
• Wei Cai A new type of hydraulic swing drive with integrated motion sensor for narrow spaces
• Prof. Mao-Hsiung Chiang Hydraulic Multi-axial Levelling Control for Turbine Access System of Offshore Wind Farm

GROUP PF - PNEUMATICS

• Prof. Jyh-Chyang Renn Application of Pneumatic Muscle Actuator to Pulse Diagnosis System of Chinese Therapy
• Prof. Wanlu Jiang Fault Diagnosis of Pneumatic Actuator Based on Virtual Prototype Fault Simulation
• Prof. Viktor Sverbilov On Stability of the Two Stage Piloted Gas Pressure Control Unit

GROUP PG - SYSTEMS

• Wei Cai Principle and Application in FAST of Parallel Reliability Test Bench

GROUP PH - TRIBOLOGY & FLUIDS

• Jiming Ma Oil film characteristics and failure mechanism analysis of one kind of mechanical seal under the effect of fluid-structure-thermal coupling
• Lingxiao Quan Innovative Structural Design and Coupled Vibration Analysis of the Bionic Hydraulic Pipeline
• PhD Corneliu Cristescu Experimental Researches to Measure the Total Resistance Forces that Appear at the Switching Process of Directional Control Valves
• Marcel Rückert Surface tension of fuels – Analysis of measurement methods and applicability on high-pressure surroundings

GROUP 7 - SYSTEMS

• Nathan Keller Thermal Management of Open and Closed Circuit Hydraulic Hybrids – A Comparison Study
• Igor Kuhlhoff Application of Weibull reliability model for functional safety of electro- hydraulic systems
• Gregor Paulmann Geneviève Mkadara Condition monitoring of hydraulic pumps – lessons learnt
• Tobias Radermacher Development and Test of a Hydraulically Actuated Prototype Trailing Edge Flap for a Wind Turbine

GROUP 8 - TRIBOLOGY & FLUIDS

• Igor Mass Pressure distribution of greases in hydrostatic bearings under static conditions
• Prof. Yutaka Tanaka Estimating the Air Volume Fraction in Hydraulic Oil by Measuring the Effective Bulk Modulus
• Markus Schulz Influence of different shaft surface finishes on the tribological and functional behaviour of radial shaft seals
• PhD Mandy Wilke Optimization of Existing Hydraulic Sealing Systems Due to Improved Lubrication

GROUP 9 - COMPONENTS

• PhD Marko Simic CFD optimization of hydraulic high-response switching valve
• Marc Leinweber Innovative transmission solenoids and -valves through standardization in the product development- and manufacturing process
• PhD Futoshi Yoshida Study on Dynamic Characteristics of Water Hydraulic Proportional Control Valve in Nonlinear Region
• Paolo Leutenegger LiView®: a disruptive sensor technology for intelligent hydraulic components

GROUP 10 - DIGITALIZATION, CONNECTIVITY & COMMUNICATION

• PhD Maxim Andreev Pipeline simulation by the method of characteristics for calculating the pressure pulsation of a high-pressure water plunger pump
• Vincent Rémillard Simulating an Electrohydraulic Self-Levelling Loader by Means of CAN Bus Connected Devices
• Prof. Kazushi Sanada Condition for Real-time Measurement of Power of Unsteady Fluid Flow in a Pipe by Kalman Filter
• Norman Brix Torque Control for Mobile Machines

GROUP 11 - PNEUMATICS

• Maximilian Waerder Psychoacoustic analysis of pneumatic switching valve noise
• David Rager New programmable valve terminal enables flexible and energy-efficient pneumatics for Industry
• Fedor Nazarov A Novel Approach for Pneumatic Pressure Booster
• Prof. Joao Falcão Carneiro Experimental characteristics of a linear peristaltic actuator

GROUP 12 - COMPONENTS

• Peter Kloft Edge welded metal bellows accumulators
• Sangbeom Woo A model based approach for the evaluation of noise emissions in external gear pumps
• PhD Olivier Reinertz A comparative study on dither signals and their parameterisation
• Prof. Takao Nishiumi Development of a novel Helmholtz hydraulic silencer for attenuating the pressure ripple from a fixed displacement pump with variable rotational speed

GROUP 13 - DESIGN PROCESS

• PhD Jürgen Berbuer Efficiency by design: Piston pumps and motors with predefined tribological systems enable prediction and optimization of losses and efficiency
• Rüdiger Kampfmann State-of-the-art and future methods for model-based engineering in practical applications
• Andreas Dietrich Computer Aided Development and Optimization of Electrohydraulic Pump Actuators for Mobile Applications
• PhD Georg Schoppel Virtual Engineering in Hydraulic Valve Design

GROUP 14 - PNEUMATICS

• PhD Wolfgang Gauchel Automated Commissioning of Pneumatic Systems
• Philipp Hedrich Active Pneumatic Suspension for Future Autonomous Vehicles: Design, Prove of Concept and Hardware-in-the-Loop Simulations
• Harald Kuolt Vacuum generation for handling technology: mobile, autonomous and energy efficient
• Shuai Ren A pressure-time adaptive algorithm of a new simulated cough device based on pneumatic system

GROUP 15 - COMPONENTS

• Thomas Kramer Intelligent Condition Monitoring of Bi-stable Process Valves
• Christophe Habegger New generation of intelligent electromechanical valve actuation
• Wolfgang Bock Hydraulic Fluids - Solutions of Complex Requirements
• Roland Fietz Online Calculation of Guide Rings for Hydraulic Cylinders

GROUP 16 - SYSTEMS

• Bert Brahmer On Adaptive Electro Hydrostatic Actuators
• PhD Heiko Baum Disordered flow to the reservoir – measures to improve the situation
• PhD Edgar Weishaupt 2oo3plus – A New Design of Electro-hydraulic Safety Controls for Critical Applications
• PhD David van Bebber System Resonance Frequency Analysis With Distributed Parameter Cylinder Models

GROUP 17 - MOBILE APPLICATIONS

• Seiji Hijikata A Hydraulic Hybrid Architecture combining an Open Center with a Constant Pressure System for Excavators
• Ulrich Lenzgeiger Electronic Load Sensing for Tractors
• Daniel Dix From driver feedback to valve spool
• Thales Agostini Boosting Efficiency of an Excavator by Zonal Hydraulics

ANNIVERSARY LECTURE

• PhD Shimpei Miyakawa Bond of 3+ Decades of an AvH Awardee at RWTH Researching Water Hydraulics