Proceedings and presentations

  Copyright: © ifas

Contact

Niklas Bauer

Name

Niklas Bauer

Deputy chief engineer

Phone

work
+49 241 80 47732

Email

E-Mail
 

Download for paticipants

The complete conference proceedings and presentations are available at the following link:

Download the IFK proceedings and presentations

The download link is password protected and is available to participants of the 13th IFK. If you were a participant and need the password, please get in touch with the contact person on the right.

 

Publication of the papers

Some of the conference papers were published via Open Access, the International Journal of Fluid Power or a Special Issue of Chemical Engineering & Technology by Wiley Publishing. You can see this accordingly in the lists below.

 

Open Access Publications

The conference papers, which have been published as Open Access, are available at the following link:

Download Open Access

Open access publications include the following papers:

A - TRIBOLOGY

  • Lars Brinkmann Tribological analysis of the plain bearings in an external gear pump considering separate bearing bushings
  • Svenja Horn Tribo-optimized lubricating interfaces in hydrostatic pumps with surface shaped slippers

B - ELECTRIFICATION

  • Shaoyang Qu Design and Verification of An Open-Circuit Electro-Hydraulic Actuator System with An
  • Shaole Cai Research on Power Uninterrupted Shift Strategy of Electric Loader Based on Coordinated Control of Drive Electric Motor and Wet Clutch

C - SPECIAL APPLICATIONS

  • Eva Holl Compact upper limb exoskeleton with a hydraulically actuated elbow join
  • Thomas Farsakoglou Review of offshore winch drive topologies and control methods
  • Rituraj Rituraj Investigation of an optimal design and control of digital hydraulic drive for knee exoskeleton

D - MOBILE APPLICATIONS

  • Denis Ritz On the qualification of common off-road hydraulic systems for upcoming automation
  • Xiaofan Guo Multi-Pressure Rail System Design with Variable Pressure Control Strategy
  • Sebastian Deuster Methods of Environmental Information Acquisition by Sensor Data and Digital Twins
  • Eric Fischer Data analysis for the evaluation and design of a model-based fault detection based on an independent metering system for mobile hydraulic drives

E - EHA

  • Amos Merkel Identification of wear progression due to variating operation modes of small high dynamic piston pumps used in frontline flight control application
  • Tobias Schulze Plastic components for electro-hydrostatic drives

F - SYSTEMS I

  • Peter F. Pelz Sustainable Systems Design – The New Engineering Design Paradigm
  • Željko Šitum Hydraulic Actuator Control Using Cartridge Valves
  • Denis Jankovič The Concept of Multi-Agent Smart Hydraulic press
  • Christa Düsing Integration of a Safety Function-FMEA into a Professional FMEA-Software Tool to meet the New Draft of ISO 13849

G - MANUFACTURING

  • Jaroslav Dvořáček Additive manufacturing of springs for linear motors of High dynamics response Proportional directional valve
  • Robin Mommers High Volume Production of Pistons and Cups for Floating Cup Pumps and Motors

I - SYSTEMS II

  • Abid Abdul Azeez Multi-physics Co-simulation of an Electric Reach Truck
  • Simon Köhler Integration of fault detection and diagnosis methods into OPC UA for mobile machinery
  • Ambra Fioravanti Gas sensors for monitoring hydraulic fluid conditions
  • Yu Yao Automatic walking method of construction machinery for special operating scenarios

J - DIGITIZATION

  • Faras Brumand-Poor Control of a Hydromechanical Pendulum with a Reinforcement Learning Agent
  • Philipp Wetterich Towards decentral Condition Monitoring based on Small Data and hybrid Soft Sensors
  • Minxing Liu Estimation and Evaluation of Energy Optimization Potential with Machine Learning Method for Active Hydrostatic Lubrication Control at Cradle Bearing in Axial Piston Pump
  • Jing Yao Data-driven Fault Diagnosis Based on Deep Learning for Multiple Failures of High Speed On/off Valve

K - COMPONENTS

  • Manuel Rexer Transient heat transfer in reciprocating devices – physical model and model validation
  • Keith Pate Study of Variable Cam Profiles in Mechanically Actuated Digital Fluid Power Systems
  • Nicola Casari A novel method for the numerical investigation of pendulum slider pumps

L - FLUIDS

  • Harry Mehler Time- and space-resolved simulation of the air content in hydraulic systems

I - MOBILE HYDRAULICS

  • Salih Tetik Secondary Control Based Hydraulic Architectures For Mobile Applications
  • Steffen Antoni Hydropneumatic Spray Boom Control - Rethinking Technology
  • Paul Marshall Application of a Digital Displacement combined Propel & Work Function Transmission to Off-Highway Machines – Case Study on 4.5t Forklift

II - CYLINDER CONTROL

  • John Hutcheson Motion Control of a Hydraulic Cylinder with a Digital Displacement Pump Motor
  • Kristof Schlemmer Extending the Boundaries of Electrohydrostatic Actuation

III - FLUIDS & FUELS

  • Katy Gibson An Integrated Approach to Achieve Sustainability Goals with Biodegradable Hydraulic Fluids
  • Enrico Pasquini Hydrogen as Fuel – Storage System Simulation in Ultra-Heavy-Duty Applications
  • Peter Kloft Gas compression units for gases of high purity

IV - DIGITAL INDUSTRIES

  • Faried Makansi Feature Generation and Evaluation for Data-Based Condition Monitoring of a Hydraulic Press
  • Tapio Torikka Development and Operation of a Machine Learning based Predictive Maintenance System in the Real World
  • Kevin T. Logan Data Management as an Enabler of Sustainability – Discussion Using the Example of a Digital Data Sheet

V - DESIGN OF MOBILE SYSTEMS

  • Henrique Raduenz Rule- and Neural Network-based Energy Management for a Hydraulic Hybrid Wheel Loader
  • David Fassbender Using Displacement Control for Single Cylinders on an Electric Mobile Machine - Improved Efficiency Versus Increased Component Costs
  • Andreas Opgenoorth Switching procedures of multi-pressure systems for electrified excavators

VI - SIMULATION

  • Zoufiné Lauer-Baré Analytical formulae in fluid power, quo vadis in times of CFD and I4.0?
  • Stephan Weber Fast 1D Solution of Hydraulic Systems with Fully Coupled Thermo-Hydro-Mechanical Interactions
  • Benedikt Müller Model-Based Engineering of an Arial Working Platform with Trajectory Control

VII - PUMPS & DATA

  • Abid Abdul Azeez AI-based condition monitoring of a variable displacement axial piston pump

VIII - PNEUMATICS I

  • Wolfgang Gauchel On the thermodynamics of pneumatic compression and expansion
  • Fedor Nazarov Sensitivity Analysis and Robust Optimization of an Integrated Pneumatic End-Position Cushioning

IX - PUMPS

  • Peter Achten Measuring the effect of shuttles on the overall efficiency of a slipper type axial piston pump
  • Jérémie Lagarde Danfoss Digital Displacement & Editron: An efficient electro-hydraulic system for mobile applications

XI - PNEUMATICS II

  • Stephan Merkelbach Closed Loop Pneumatic Levelling Control for CV Driver Seats

XII - MOBILE SYSTEMS & I 4.0

  • Tobias Lange Development and Design Considerations of Next Generation Electric and Hybrid Dozers
  • Christian Haas Environment Detection and Trajectory Planning Concept for an Automated Excavator using Open Source Software

XIII - VALVE ACTUATION

  • Michael Erhard The path to distributed hydraulic actuation - Model-based system design of enhanced mechatronic pilot systems
  • Amadeu Placido Neto Development and Qualification of a New Rotary Subsea Valve Actuator for Small Bore Process Valves using Continuous Integration Approach

XIV - MICROFLUIDICS

  • Annabell Effner Experimental Investigation on a peristaltic Micropump based on Magnetic Shape Memory Alloy
  • Titus van den Brink Micro hydraulic pumps for battery powered portable rescue tools and more
 

International Journal of Fluid Power

 

Chemical Engineering and Technology